On January 25, 2010, at around 5pm, John Witmer of Millersburg, Pennsylvania, arrived home to discover that the Old Pony Truss Bridge connecting Route 147 to his private driveway had collapsed and decking from the bridge had fallen onto the railroad track below. Heavy rain caused the bank below the bridge to give way when the 19th century stone and mortar retaining wall supporting it failed. To make matters even worse, a train was scheduled to run along the track beneath the bridge at 5:15pm. Luckily, Witmer was able to slide down the bank, run up the other side and call 9-1-1 to have the train stopped before it got to the debris-covered area of the track.
With the crisis averted, Witmer still needed to find a way to access his property and Norfolk Southern Corporation, owner of the rail line, needed to get their track cleared and the rail line back in service.
JMG Construction Company was contracted by Norfolk Southern to clear the rail road track and replace the fallen retaining wall. As workers labored to remove the debris from the tracks, Dan Schlegel, the owner of Redi-Rock manufacturing company, Paxton Precast, heard about the incident which occurred just minutes away from his production facility. "Dan literally went down to the job site and said, 'hey I have something you can use to fix this!' and gave them the blocks," said Betsy Wisniski of Paxton Precast.
The Redi-Rock gravity retaining wall system uses one ton, precast concrete blocks that rely on sheer mass to hold back the earth without reinforcement. Engineered with a patented knob-and-groove design, Redi-Rock blocks stack like giant Legos, making installation quick and easy and with minimal excavation required.
As soon as the debris was cleared from the track, the rail line was once again operational and work began to replace the old retaining wall using Redi-Rock Cobblestone texture gravity blocks. JMG Construction had previous experience installing Redi-Rock products, so they were able to get right to work. Due to the tight work area, the Redi-Rock blocks were staged a short way down the road, loaded onto flatbed trucks that moved along the rails and unloaded at the construction site. In total, the 13.5 foot (4.1 meters) tall wall was designed to include one row of 60 inch (1520 millimeter) bottom blocks, two rows of 60 inch (1520 millimeter) middle blocks, four rows of 41 inch (1030 millimeter) middle blocks, and one row of 28 inch (710 millimeter) top blocks.
The overall square footage of the project is around 13,000 square feet (1,208 square meters) with the tallest walls close to 20 feet (6.1 meters).
The wall replacement project was completed in mid-March, and during that time, the homeowner's driveway was rerouted by creating a new road along their property and utilizing an existing level crossing a quarter of a mile down the road.
Erosion is still an issue along Route 147 in Millersburg, Pennsylvania, however it is no longer an issue for Norfolk Southern's rail line where the bridge collapse occurred.
Project: Witmer Farm Rail Bridge #173 Owner: Norfolk Southern Corporation Block Manufacturer: Paxton Precast Installer: JMG Construction Location: Millersburg, Pennsylvania Year Built: 2010
Gravity Retaining Wall Blocks - Massive, one-ton Redi-Rock gravity blocks rely on the sheer mass of each block to hold back the earth.
Cobblestone Texture - Redi-Rock Cobblestone blocks feature a great stacked stone aesthetic with the appearance of six smaller blocks.
Your local retailer is
at Redi-Rock International.
Call or email .
There are over 130 Redi-Rock manufacturers around the world. Enter your project's postal code to find your closest retailer.
Still can't find what you're looking for?