The right-of-way in Michigan allows the road commission 33 feet (10.1 meters) from the center line to private property on either side.
While this is plenty of room in most cases, in hilly terrains retaining walls are needed. In the Burt Lake Road case, the project needed to widen the roadway and reduce the grade of a very steep slope while staying within the right-of-way. The adjacent properties were wooded and the landowners wanted to save their trees. A retaining wall of up to 18 feet (5.5 meters) high was required to retain the slope.
MDC Contracting proposed using Redi-Rock, a 2,500 pound modular block with a 9 inch (230 millimeter) setback to create a gravity retaining wall with a batter angle at 2V:1H requiring no geo-grid. The wall needed to be buried up to 6 feet (1.8 meters) at the tallest part to provide global stability and base sliding resistance; the tallest exposed section of wall is 18 feet (5.5 meters) high. Redi-Rock's large unit size and weight combined with its interface shear capacity made the construction of the Burt Lake Road Wall a viable solution.
Project Name: Mullet-Burt Lake Rd. #4 Engineer: Northwest Design Group Manufacturer: MDC Contracting, LLC Installer: MDC Contracting Location: Cheboygan, Michigan Year Built: 2004
Your local retailer is
at Redi-Rock International.
Call or email .
There are over 130 Redi-Rock manufacturers around the world. Enter your project's postal code to find your closest retailer.
Still can't find what you're looking for?