Design proven, engineered solutions for your next bridge or road project
If you're like most engineers designing highway and bridge projects, you're looking for a retaining wall system that is proven and meticulously engineered.
We're here to help. Redi-Rock® is a proven precast modular block retaining wall system, created by engineers, for engineers.
Engineers like you have designed thousands of Redi-Rock projects that have been built on critical roads and bridges around the world since 2000. A ton of resources and testing reports are available to help make designing your walls clear-cut. And the simple, repeatable installation process makes it easy for contractors to install the walls properly.
How can we help you give your project a wall that will stand the test of time?
After Flood, County Chooses Gravity Walls for Emergency Repairs
In September 2013, floods ripped through Boulder County in Colorado, massively damaging the roads. See how engineers design an emergency flood repair retaining wall solution using Redi-Rock gravity walls!
Redi-Rock is a proven, engineered solution for designing highways, bridges, and culverts. Dig into Redi-Rock engineering resources here - including Redi-Rock Wall Analysis Software, Design Charts, and more!
Installing walls for roads and bridges often requires special considerations. Find out the best way to install Redi-Rock walls in the Redi-Rock Construction Details.
Redi-Rock In Action: Highway and Bridge Case Studies
The Parklands, Louisville, Kentucky
Creating access to this hilly park system presented some daunting challenges to the design team. Multiple retaining walls were required to create access. "The high efficiency of the PC System really made it possible to design tiered walls with those loads at that height," said Design Engineer Clint Hines, PE. "It would be hard to make it work with anything else."
Clermont County in Ohio replaced failing bridge abutments with Redi-Rock Ledgestone walls that were fast and easy to install using their own crews. "The quickest way to repair the bridge was to remove the beams and replace the abutments using Redi-Rock blocks," said Clermont County's Bridge Engineer Todd Gadbury, P.E.
This development needed wing walls for bridge construction over a creek in Nova Scotia. See how they used Redi-Rock retaining walls and freestanding walls with vertical batter to achieve their goals! The development liked the bridges so much that they expanded the project and used Redi-Rock to create a nearby amphitheater.
Redi-Rock retaining walls solved right-of-way issues in this Mississippi DOT highway expansion project. Designers used the efficiency of the gravity system where possible and the proven reinforced system where required to make a cohesive, strong solution.
Emergency Repair of Diversion Dam Access Road, Bellingham, Washington
After a huge storm washed out critical access to a dam, the City of Bellingham, Washington needed a fast solution to repair a bridge and restore access to the dam. Designers used Redi-Rock gravity and reinforced blocks to create a solution!
When the FBI headquarters near Cincinnati was relocating, the township needed to create a 19.5 foot tall retaining wall to separate the access road from a neighborhood. See how they did it with Redi-Rock gravity walls.
Please enter your project location to help us prepare a quote to serve you better!
We like you, and you like Redi-Rock! That's why we'll keep you up to date on new engineering resources, case studies, and new product info about once a month. Don't worry, you can hit 'unsubscribe' at any time!
Contact Your Local Expert
Your local retailer is
at Redi-Rock International.
Call or email
.
There are over 130 Redi-Rock manufacturers around the world. Enter your project's postal code to find your closest retailer.