Saratoga Springs, New York installed a 12.6 kilowatt hour solar project in 2007 to power their waste water treatment facility. When the soil around the installation began eroding, city officials needed to find a way to halt the erosion issue and improve the overall look of the project.
"Installing the solar panels was a step in the city's overall energy performance initiative. We had an opportunity to put the latest in solar panels in the plant and we wanted to dress it up around it," Director of Public Works William McTygue said.
A retaining wall was not part of the original design of the project, but the soil surrounding the solar panels was loose and sandy, which allowed significant erosion to occur during rain storms. The grass could not grow and the area was unsightly. Since the waste water plant is a "showcase project," the Saratoga Springs Department of Public works needed to improve the look of the area.
The Department of Public Works is housed in an historic building and the solar panel installation needed to match the look of the facility. McTygue had seen a Redi-Rock retaining wall project at another location in Saratoga Springs and chose to use the massive gravity retaining wall blocks to build a knee-high skirting around the panel area.
Redi-Rock blocks are manufactured in different sizes and shapes, many of which weigh more than one ton. The Redi-Rock Cobblestone texture blocks used in this project have 5.75 feet (.5 meters) of face texture on each block, and give the appearance of six smaller blocks. The large blocks allow for quick and easy installation, but have the aesthetic appeal of a smaller block landscaping wall.
The project did not require engineering because it used just two courses of blocks totaling three feet (0.9 meters) in height. The wall outlines the panel area in a rectangular shape and utilizes Redi-Rock 28 inch (710 millimeter) blocks. McTygue said that plans are underway to put pea stone in the area at the base of the solar panels and to plant grass around the retaining walls to further improve the aesthetics of the project.
Project: Solar Panel Installation at the Saratoga Springs Water Treatment Plant #95 Owner: Village of Saratoga Springs Manufacturer: Redi-Rock Walls of the Adirondacks Installer: Saratoga Springs Department of Public Works Location: Saratoga Springs, New York Year Built: 2008
Gravity Retaining Wall Blocks - Massive, one-ton Redi-Rock gravity blocks rely on the sheer mass of each block to hold back the earth.
Cobblestone Texture Blocks - Redi-Rock Cobblestone blocks feature a great stacked stone aesthetic with the appearance of six smaller blocks.
Your local retailer is
at Redi-Rock International.
Call or email .
There are over 130 Redi-Rock manufacturers around the world. Enter your project's postal code to find your closest retailer.
Still can't find what you're looking for?